HOW TO USE VALORANT ECO

1

*For this testing we are running the game in WINDOW OR BORDERLESS mode. and NO multiple screens used.
*The aim keys and smooth levels are managed by the F keys buttons ! Not clicking on the menu.
*This project has no visible checks. Be sure to use to use small FOV levels. Also, the use of aimbot is risky at any level, use with caution.

2

Extract and open the Hydro loader as an administrator

3

A new window should open, add the key obtained from the store and press enter, note that it will take 2 times, 1 to add the key and another one to read the key, like shown on the picture.

4

*Once you have confirmed the key, a new selection will appear. Use the directional arrows up and down to navigate. Select the option LOAD DRIVER FIRST and press ENTER.

5

The project has to give you then the following confirmation. Proceed to the next step. DO NOT CLOSE THIS WINDOW YET

6

Now with the load driver completed now open the game and REACH THE GAME LOBBY. Confirm from this point you're on window or window borderless mode first.

7

Go back to the loader you left before and now select the option Riot Valorant.

8

If everything completed as intended, you should be able to see now the menu at the game lobby. BY ALL MEANS DO NOT CLOSE THE CMD LOADER! YOU CAN JUST MINIMIZE IT.

With the menu loaded, operate with the menu by pressing the button INSERT from your keyboard. Operate with the options by clicking on them to enable/disable options or manipulate them or using the F keys to change the aim key or bones.

Keep present that if you close the game, you just have to repeat the Load Riot vanguard step and not the Load driver from the CMD, however, if you shut down the device, repeat the whole process.